Blog Home
Total Fender Transformation: Turn Signal Eliminator
April 15, 2019

Total Fender Transformation: Turn Signal Eliminator

Today, custom LED motorcycle lighting is more popular than ever! Our Custom Dynamics® Turn Signal Eliminator Kit hit the market earlier this year. Already, it has gained popularity among H-D™ Touring owners (especially for Performance Baggers). It’s no secret that bikers love their rides, especially when they can make them their own! The light-weight aluminum radius license plate replaces the stock rear turn signal bar. In turn, the kit creates new possibilities for a sleek, clean looking application.


The design concept was to remove the turn signal arm bar on H-D™ Touring models, but in a hassle-free way. 2014-2019 Road King models especially needed a way to clean up the bulky, pancake-style turn signals that come stock. With the turn signal arm bar gone, these bikes could use our ProBEAM® Fillerz®, a very popular product for H-D™ Touring models! However, with the turn signal arm bar still in place, the ProBEAM® Fillerz® wouldn’t be very visible at all.

ProBEAM Fillerz Install Location

Designed with 2014-2019 Road King models in mind, the Turn Signal Eliminator Kit also offers fitment for almost all H-D™ Touring models, including:

1997-2013 Harley-Davidson® Electra Glide®, Ultra Limited and Road Glide® Ultra (including CVO™), 1997-2019 Road King®, Road King® Classic, & Road King® Special, 2014-2015 FLHTKSE, 2015 FLTRUSE, 2006-2019 Street Glide®, Street Glide® Special & 1999-2019 Road Glide®, Road Glide® Special


Up until now, the only way to achieve this kind of look was with custom fabrication and lots of know-how. Now, the plug and play application is a job for almost any weekend wrencher! We provide step by step instructions for the plug and play Turn Signal Eliminator Kit. Plus, instructions are also available online. The turn signal arm bar provides the license plate illumination for many bikes. With it gone, we needed a way to light up the license plate. So, included in the kit is our LED illuminated radius plate frame in gloss black or chrome finish. The installation is a simple 2-wire hook up and we back the LEDs with our Lifetime LED Warranty. We also include mounting hardware in the kit. Check out the Turn Signal Eliminator Kit installation video and other motorcycle LED lighting installation videos now!

Before and After Turn Signal Eliminator Kit

Plus, we have the best customer support in the industry! Need help with your Motorcycle LED Lighting? We can help!


Rear Turn Signal Options

The bike has a very custom looking rear fender with the turn signal arm bar gone. But, the bike doesn’t have any rear turn signals either! Now customers can customize the look of their bike even further. Many of the most popular Custom Dynamics® motorcycle LED lighting products work as the rear turn signals.


ProBEAM® Fillerz®

Fill the void in your saddlebag support rails with our ProBEAM® LED Motorcycle Fillerz™ Lights! ProBEAM® Fillerz® have been engineered from the ground up using the highest quality automotive LEDs and modern light pipe design! Custom Dynamics® premium line of aftermarket LED Fillerz® now provide increased visibility with full contrast brake to maximize safety through modern technology for Harley-Davidson® motorcycles.

ProBEAM Fillerz with Turn Signal Eliminator Kit

Plasma Rods™

Plasma Rods™ use a patented technology to produce a seamless, unmatched LED brightness, unlike anything you’ve seen.  Custom Dynamics® Plasma Rods™ can be used almost anywhere; most commonly, between the bike’s fender and saddle bags as an additional run, brake or turn signal.  Single Color Red or Dual-Color Red/Amber.  Available in 8”, 10”, 12” and 14” lengths – perfect for custom baggers!

BAGZ™ LED Motorcycle Saddlebag Lighting

Looking for a slim, custom looking bag light for your new custom looking rear fender? You’re in luck! Low Profile BAGZ™ have been designed with a sleek low-profile design. Utilizing super bright red LEDs behind a red or smoked lens, the Low Profile BAGZ™ provide dual intensity rear function to the OEM Harley-Davidson® hard saddlebags. Low Profile BAGZ™ come pre-taped and include a plug and play wiring adapter for an effortless install and easy removal of the saddlebags. Available in plug & play configuration for Run/Brake, Run/Turn or Run/Brake/Turn function depending on model.

Or, for a more robust looking saddlebag light, you can increase your visibility and safety on the road with BAGZ™ Motorcycle Saddlebag LED Lights for H-D™ (OEM) Saddle Bags!  Available in Chrome or Gloss Black Finish with either a Red or Smoke lens. 86 Super Bright Dual Intensity Red LEDs are in each unit. No doubt you’ll get noticed for all the right reasons! Upgrade to the Sequential plug & play configuration for Run/Brake function with Sequential Red Turn Signal – no additional modules required!

Also available now: ProBEAM® BAGZ™ Motorcycle Saddlebag LED Lights! Highly anticipated, the ProBEAM® BAGZ™ do not disappoint! ProBEAM® BAGZ™ match perfectly with your other ProBEAM® Motorcycle LED Lighting upgrades! 

These are the perfect match to ProBEAM® LED Fillerz™ Lights, ProBEAM® Motorcycle LED Taillights and ProBEAM® Motorcycle LED Fender Tip Light! 

With a light pipe design and full contrast brake, you’ll be able to increase your visibility while maintaining a modern, sleek look! Learn more about our ProBEAM® LED Motorcycle Lighting product line! Looking for a direct replacement option? ProBEAM® Motorcycle LED Turn Signals are perfect! 

See all the BAGZ™ Motorcycle LED Saddlebag Lighting styles!

For more information on any of the products mentioned here, call Custom Dynamics® or contact your local Drag Specialties dealer!




  1. Ian Burton on 03.18.2024 at 4:36 am

    I have a 2021 FLHTK – but in the UK….
    My rear fender has the run/brake light and the turn signal bar. The licence plate is mounted below the turn signal bar and UK plates are much bigger than in the USA.
    Will this kit allow me to attach the OEM licence plate mount and therefore attach a standard UK plate (9 x 7 inch)? (I plan to also install filler lights to replace the turn signals).

    • Karen on 03.27.2024 at 7:43 am

      The Turn Signal Eliminator plate frame will not accommodate the larger 9″ x 7″ license plate.

  2. Travis on 10.15.2022 at 9:25 am

    What do I need to eliminate my light bar and add plasma rods on a 2022 road glide special

    • Karen on 10.17.2022 at 9:12 am

      Hi Travis, you would be able to use the Turn Signal Eliminator, Plasma Rods with BCM Wire Harness & Rear Turn Signal Stabilizer to make those modifications. If you’d like to discuss all product options & go over exact installation details you can contact our office at 1-800-382-1388.

  3. Jeff Cornelius on 09.09.2022 at 6:35 am

    I have a 22 Road Glide ST. I’ve installed the ProBEAM Fillerz. (Which look really good) Now I want to get rid of the turn signal bar. I want to add the Turn Signal Eliminator Kit. I’ve read the installation instructions but really don’t understand how to tie them in with the Fillerz. Could you please explain.


    • Karen on 09.09.2022 at 10:22 am

      Hi Jeff! Thanks for reaching out. We will have a tech email you with specifics for installing this product.

  4. Tony Sutton on 06.26.2022 at 11:14 pm

    What kit would I use to eliminate the turn signal bar from s 2005 Roadking

  5. Daniel Easter on 11.17.2021 at 12:29 am

    i have a 2006 ultra and i am wanting to do about with the rear turn signal bad and replace it with the filler panels and possible fender extension that has the led turn signals built into the filler panel between the bags and the rear fender. i have searched for days and have not been able to come up with anything that is compatible for my bike. please help i am loosing all hope

    • Karen on 11.17.2021 at 9:29 am

      Hi Daniel, you could use our Turn Signal Eliminator to remove the rear turn signals and mount the license plate below the center taillight.
      For the rear lighting, we do not currently offer a way to mount the Fillerz on the 2006 model. The closest option we would have is to use our Plasma Rods or Saddlebag Lights as the rear turn signals. Give our office a call at 1-800-382-1388 to discuss these options and configurations in detail.

  6. Wayne Doyle on 03.09.2021 at 11:45 am

    I’m trying to eliminate my all in one rear led indicators, run and brake standard on my 2017 m8 Roadking Special.
    I’ve purchased ciro blades for my brake running and indicators. But the problem is all the licence plates are only for USA, and seem too small, my question is if I purchased your turn signal eliminator kit, A is it plug and go and B do you think I could modify the licence plate so I could accommodate slightly bigger licence plate.
    best regards Wayne Doyle from UK

    • Erin Armitage on 03.09.2021 at 1:24 pm

      Hi Wayne! We’ll send you an email directly with product information! The email is coming from [email protected] and you can reply directly to that email with any questions you might have! We look forward to hearing from you soon!

  7. Johnny Carvalho on 03.08.2021 at 10:55 pm

    HI CD
    I have a 2006 FLHTCUI Ultra Classic, i got the low profile bagz sequencal turn signals for the saddlebags (btw great product) now if i want to remove the big turn signal lollipop bar can i use the turn signal eliminator kit along with a low profiled LED rear brake light with bottom light window ? is the anything from the 2006 FLHTCUI Ultra Classic rear fender that would make this not posible

    • Erin Armitage on 03.09.2021 at 8:28 am

      Hi Johnny! Thank you for continuing to choose Custom Dynamics! You can absolutely use the Turn Signal Eliminator Kit for H-D™ Touring Models along with one of our Complete LED Taillight Units on your 2006 FLHTCUI Ultra Classic! However, you won’t necessarily need the bottom window on the taillight because the Turn Signal Eliminator Kit includes an LED illuminated radius motorcycle license plate frame to provide tag illumination! I’ve included links in this response for the parts you’re interested in so please let us know if you have any additional questions after reviewing that information! You can reach us by phone at 1-800-382-1388 or by email ([email protected])! We look forward to hearing from you soon!

  8. Dexter on 12.08.2020 at 7:10 pm

    I purchased the eliminator kit, and it is very straight forward to install. My question is, Is there something that acts as a buffer between the eliminator frame and the fender to protect the fender paint?

    • Erin Armitage on 12.09.2020 at 9:28 am

      Hi Dexter! While we don’t provide a gasket for the Turn Signal Eliminator Kit, if it’s mounted properly it will be secure to the rear fender and won’t move or have any “play” once installed. However, you are more than welcome to fabricate a gasket of your own (something that would act like a foam cushion) if you’d like extra protection for the paint behind the mount. Let us know if you have any additional questions and thank you for choosing Custom Dynamics!

  9. Paul Joseph on 09.29.2020 at 10:01 am

    I have a 2015 Harley ultra classic, i am putting a quick release on the tour pack now I need a place to put my plate , can You HELP?? I have the filler plate turn signals , so thats not a problem and i have a hide away antenna, and saddle bag speakers, so I just need a place for the plate .

    Thanks for any info

  10. Jason on 05.16.2020 at 9:22 pm

    Hi is there any reason this wouldn’t fit a 92 FLHTC?

    • Erin Armitage on 05.18.2020 at 8:58 am

      Hi Jason,

      Prior to 1997, the bolt holes are the same distance apart but, the radius of the fender is different and it puts the mounting bolts at a different angle when the Turn Signal Eliminator Kit lays on the fender. But, we can always add you to the product request/wish list if you would like! That way we can let you know should a fitment become available for your 1992 FLHTC Electra Glide Classic! To be added to our request list, you can either call us at 1-800-382-1388 or email us direct ([email protected])! If you have any other questions in the meantime, please don’t hesitate to let us know!

  11. zack cater on 03.20.2020 at 11:26 am

    very interested in this turn signal eliminator kit. ive been looking at ways of cleaning up the back of my 09 road king. with this kit do you offer anything to clean up the mounting location for the stock above the taillight license plate frame?

  12. Jim on 10.08.2019 at 8:01 pm

    I’ve look over the instructions and I fine until it says to Connect the wires of the License Plate frame to the running light circuit, Black to Ground (typically Black) and White to positive 12vdc (typically Solid Blue) Refer to Figure A.. WHere exactly do I make the connection, do I splice? plug?

    • Erin Armitage on 10.09.2019 at 8:40 am

      Hi Jim!
      We’d suggest connecting the black and white wires from the License Plate Frame to the stock tag light wires. The stock tag light wires should be accessible once the turn signal arm bar is removed being that they are routed through the fender to where the Eliminator Kit/License Plate Frame install. Let us know if you have any other questions!

  13. Dwayne Ellis on 07.14.2019 at 10:51 pm

    I have been looking for something to replace the turn signal bar on my 2018 road king FLHR. How can I order the turn signal eliminator kit. there’s no price listed

    • Erin Armitage on 07.15.2019 at 1:21 pm

      Hi Dwayne!

      The Turn Signal Eliminator Kit would be a direct, bolt on replacement for the OEM stock turn signal bar on your 2018 Road King (FLHR). The kit costs $129.95 – you can either order on-line by selecting the “Customize and Buy” button on our product page or, can call us to place the order over the phone (1-800-382-1388; Business Hours: 8:30am – 5:30pm EST Monday – Thursday; Closed Noon – 1pm & 9:30am – 5:30pm EST Friday; Closed Noon – 1pm)! You can find the Turn Signal Eliminator Kit, here:

Leave a Comment
Want your image to appear next to your comment? Get a gravatar!

Leave a Reply

Your email address will not be published. Required fields are marked *

More Recent Posts
May 20, 2024

Turn heads and stay safe as you take your Side-by-Side (SxS) or UTV from the trails to the streets with CD Off Road’s Street Legal Lighting Solutions. Our latest lineup is not only designed to enhance your off-road experience, but also to ensure you’re compliant and ready for the streets. STREET LEGAL KITS Transform your […]

February 15, 2024

Dealers at the Louisville NVP likely had a tough time missing the performance motorcycle headlight from Custom Dynamics®. The super-bright, highly stylized Shark Demon™ Performance LED Headlight for Road Glides made its debut in Louisville. Therefore, the Custom Dynamics® booth was a popular spot throughout the entire weekend. Now, riders can order this DOT-compliant performance […]